Zing MPS
Zing MPS - Image 2
Zing MPS - Image 3

Zing MPS

Zing MPS Size 1 & Size 2

The Zing MPS is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. 

Model Recommended User Height Weight Capacity Transfer Height
Size 1 Up to 44″ (112 cm) 70 lbs (32 kg) 32 in (81 cm)
Size 2 32-60″ (82-152 cm) 154 lbs (70 kg) 31 cm (79 cm)
AltimateMedical Logo Icon

The Zing MPS (Multi-Position Stander) is an innovative pediatric standing frame designed to seamlessly transitions from supine to vertical to prone positioning. (up to 20°) — without transferring the child and without adjusting pads, foot plates, or trays. Designed for early intervention through adolescence, Zing supports therapeutic positioning, independent leg abduction, and smooth transitions in one continuous motion. 

True Multi-Positioning Stander

Unlike traditional supine standers or prone standers, the Zing MPS features an innovative SVP (Supine-Vertical-Prone) pivoting mechanism that allows positioning from:

  • Flat-to-load transfer
  • Supine (0° – 90°)
  • Vertical
  • Up to 20° Prone
All without Transferring the user out of the stander.
AltimateMedical Logo Icon

True Hip-Pivot Leg Abduction

AltimateMedical Logo Icon

Zing MPS is designed to support lower-extremity alignment, wich may contribute to proper musculoskeletal development during critcal growth years, with independent leg abduction up to 30° per leg. (60° total abduction)

Advanced Abduction Features:
  • Pivot points aligned with the hips
  • Rotating hip guides that follow abduction changes
  • Clearly marked angle indicators
  • Single-knob independent leg adjustment
  • No wedges required
  • Feet maintain alignment with the legs
Abduction can be used throughout the entire positioning sequence – whether supine, vertical, or 20° prone. Zing standers were designed to accommodate children who may require abducted positioning as prescribed by a clinician.

No Reconfiguration

Seamless Position Changes – No Reconfiguration Required

The Zing MPS Multi-Position Stander is the only pediatric standing frame that transitions from supine to vertical to prone (up to 20°) without removing, switching, or readjusting pads, foot plates, trays, or supports. Thanks to its innovative SVP (Supine-Vertical-Prone) pivoting mechanism, children can move through positioning angles in one smooth, continuous motion – all while remaining fully supported in the stander.
What this means for Clinicians and Caregivers
  • No transferring the child between positions
  • No switching foot plates, knee pads, or trays
  • No pad reconfiguration to access prone
  • No interruption to therapy sessions
  • Maintains configured postural alignment during transitions
  • Feet maintain alignment with the legs
With traditional standers, transitioning between supine and prone often requires removing components or repositioning supports. The Zing MPS eliminates that extra step.
AltimateMedical Logo Icon

Flat to Load

AltimateMedical Logo Icon
The flat-to-load transfer surface makes loading and unloading easier for caregivers and therapists.

Modular Support

The Zing MPS Multi-Position Stander is built around a remarkably modular positioning system that adapts to a wide range of clinical needs – from early intervention to more complex postural support requirements.
Whether configured as a simpler tilt-table style stander (TT pads with padded strapping) or quipped with fully adjustable, independent positioning components, Zing MPS allows clinicians to tailor support based on the child’s unique presentation.
Designed for Customization
Zing’s modular system includes:
  • Multi-Adjustable foot plates (height, angle, rotation, depth)
  • Multi-Adjustable knee pads (including swing-away options)
  • Independent calf pads
  • Rotating hip guides
  • Pelvic and upper body support pads
  • Lateral supports (square, flat, curved options)
  • Multi-Adjustable head supports
  • Chest vests and strapping systems
Many components are available in multiple sizes, allowing the stander to grow with the child and accommodate changing positioning needs over time.
AltimateMedical Logo Icon

Sizing

AltimateMedical Logo Icon
Choosing the correct size pediatric stander is essential for proper positioning, comfort, and long-term growth. The Zing MPS Multi-Position Stander is available in three sizes to support children from early intervention through adolescences, with weight capacities up to 154 lbs
ModelRecommended User HeightWeight CapacityTransfer HeightFrame WeightIdeal Use
Size 1Up to 44″ (112 cm)70 lbs (32 kg)32 in (81 cm)55 lbs (25 kg)Pediatric multi-position stander for growing children
Size 232-60″ (82-152 cm)154 lbs (70 kg)31 cm (79 cm)82 lbs (37 kg)Larger pediatric standing frame for extended growth range

Request a quote or configure a Zing Size 1 or 2 here.

To begin, select a size using the tabs below, then select a model, itemized/package pricing, and then configure your unit.

Zing Options

Option availability may vary depending on base unit size. Available sizes are listed accordingly.

Frame Colors

Hygienic Cover Patterns

Mast
OptionOption DescriptionWhat Model(s) is this available on?
PA5530 MastMast is the base for positioning options including foot plates, knee supports, pelvic supports, upper body supports and head supports.Zing Size 1
PA5532 Mast with Leg AbductionProvides up to 30 degrees of independent leg abduction (60 degrees bilaterally). Usage and adjustment are possible throughout the entire positioning range of stander. Zing Size 1
PB5512 MastMast is the base for positioning options including foot plates, knee supports, pelvic supports, upper body supports and head supports.
Zing Size 2
PB5514 Mast with Leg AbductionLeg support tubes feature a bend or offset that allow the entire leg to abduct without having to adjust knee supports or foot plates.
Hip supports rotate or float – as the leg abducts the hip supports rotate, maintaining alignment but reducing pressure points.
The leg abduction pivot point is located in alignment with the body’s natural hip pivot, this makes abduction possible using a single knob. 		Zing Size 2

Lift Mechanisms
OptionOption DescriptionWhat Model(s) is this available on?
PA5612 Dual ControlThis option provides improved usability especially when moving the unit to a fully supine position as the foot doesn’t have to maintain downward pressure on the gas spring lift pedal. The Push Handle also can provide a more ergonomic leverage point for frequent position changes.Zing Size 1
PB5516 Dual ControlThis option provides improved usability especially when moving the unit to a fully supine position as the foot doesn’t have to maintain downward pressure on the gas spring lift pedal. The Push Handle also can provide a more ergonomic leverage point for frequent position changes.Zing Size 2
PA5614Z Gas Spring Lift LockoutThis option is critical for situations where inadvertent position changes could happen, such as a classroom environment. With the flip of a switch, the stander will be locked in place and no advertent position changes could happen.Zing Size 1, Zing Size 2
PB5504 Pow’r Up LiftRaises or lowers the user to a position with the touch of a button. Includes light touch controller, rechargeable battery and charger, Linak® actuator and an emergency release.Zing Size 2

Casters
OptionOption DescriptionWhat Model(s) is this available on?
PA5608 Directional Locking CasterGreat for transporting stander. Directionally locks one caster while leaving the other three free to swivel.Zing Size 1
PB5510 Directional Locking CastersGreat for transporting stander. Directionally locks one caster while leaving the other three free to swivel.Zing Size 2