PB5562 Zing MPS TT Size 2

Fits Individuals from 40-60″
Weight Limit: Up to 154 lbs.

The Zing MPS TT is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction.

Order Forms
SKU: PB5562 Category:

Product Description

E0641: Standing frame/table system, multi-position (e.g. three-way stander), any size including pediatric, with or without wheels

The Zing MPS TT Size 2 with Gas Spring Lift is a larger version of the Zing MPS TT size 1. The Zing MPS TT provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use. The TT versions, or tilt-table style standers, feature a longer, wider single pad that provides both pelvic and back support. It also has available padded strapping for those who do not require maximum positioning support, but individual support and positioning components can be added wherever additional support is needed.

30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.

Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.

Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS TT size 2 is a comfortable 31″ from the floor surface.

Remarkably Modular
With over 70 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS TT one of the few multi-position standers that can accommodate contractures on one or both sides.

Frame Color

Mast

Lift Mechanisms

Caster

Foot Plates

Foot Support Accessories

Leg Support

Leg Support Accessories

Knee Support

Knee Support Accessories

Pelvic/Upper Body Support

Pelvic/Upper Body Support Accessories

Pelvic Support Accessories

Upper Body Support Accessories

Head Support

Head Support Accessories

Tray

Tray Accessories

Other Accessories

Hygienic Cover Patterns

Basic Unit Imperial Metric
Height Range 40” to 60” 102 to 152 cm
User Weight Limit 154 lbs. 70 kg
Transfer Height (Horizontal Position) 31” 79 cm
     
Center of Hip to Footplate Range, Maximum, may invert footplates as necessary 34” 86 cm
Upper Body Support, Vertical Adjustment Range (7 settings) 6” 15 cm
     
Approximate Equipment Weight of basic unit, in a minimally equipped usable configuration, less most options 82 lbs 37 kg
Approximate Equipment Maximum Weight, Fully optioned unit 145 lbs. 66 kg
Frame footprint, Caster-to-caster 26.75” x 39.75” 68 x 101 cm
Maximum Dimensions 28.75” x 41.75” 73 x 106 cm
Upholstery Black nylon/ Neoprene or Molded Urethane
Hygienic Covers Polyurethane Laminate ECO-PUL

Multiple Patterns Available, see literature or website

   
Frame color Green, Purple, Orange, or White, Medium Gloss Polyester Powder Coat
Casters and Wheels 3’’ diameter 8cm diameter
     
Lifting Mechanisms Available Gas Spring

Pow’r Up (Electric)

Lift Options, if equipped with Gas Spring Dual Control (hand lever)

Lockout Knob

     
Options and Accessories    
Supine positioning/“Prone-Forward” positioning. Supine, MPS, TT Supine 0-90 degrees/ Prone 0 to 20 degrees forward
Positioning, Prone Model 90 (vertical) to 0 (horizontal)
Leg Abduction Up to 30 degrees per side
   
Feet    
Foot straps – length over arch 10” 25 cm
  15” 38 cm
  21” 53 cm
Secure Foot straps – length over arch Available in same lengths as regular foot straps
     
Footplate Options L x W 7.75” x 3.25” 20 x 8 cm
  9.75” x 4” 25 x 10 cm
  11.75” x 5” 30 x 13 cm
Footplate, platform style

 

11.5” L x 16.75” W

 

29 x 43 cm
Multi-Adjustable footplates – Plantar/Dorsi +/- 20 degrees +/- 20 degrees
Multi-Adjustable footplates – Fore/Aft +/- 0.75”

 

+/- 2 cm

 

Multi-Adjustable footplates rotation 30 degrees left/right 30 degrees left/right
 
Knees    
One-piece Calf Pad / Leg Rest 17.5” x 5.5” 44 x 14 cm
One-piece Calf Pad Strap, Fits Approximate circumference 28” to 38” 71 to 97 cm
Kneepad Depth Range (from seat plane) From tight against plane to +7” Tight to +18 cm
     
Kneepad Options, Inside Width 3.25” 8 cm
  4.25” 11 cm
  5” 13 cm
Kneepad Dimensions (Height x Outside Width)    
3.25 4” x 4” 10 x 10 cm
4.25 4.5” x 5” 11 x 13 cm
5 5” x 6” 13 x 15 cm
Multi-Adjustable Kneepads Width Range From tight together to 17.25” outside-to-outside Tight to 44 cm
Multi-Adjustable Kneepads Height Range Infinite from footplate to pelvic pad
Calf (Behind knee) Pad Option    
·       4.5”

·       5.5”

·       Fore/Aft Adjustment from seat plane

4.5 x 4.5 inches

5.5 x 5.5 inches

+3” / -2”

11.5 x 11.5 cm

14 x 14 cm

+8 cm / -5 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pads

3 sizes

9” H x 7.5” W

12” H x 7.5” W

15” H x 7.5” W

23 x 19 cm

30 x 19 cm

38 x 19 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap.

Fits approximate circumference:

19” 48 cm
Table / Tray Posterior Support Models (Supine, MPS, TT)
Shadow Tray size Molded/Acrylic 21” x 24” 53 x 61 cm
Basic Shadow Tray Height Range, referenced from hip pivot: +4” to +7” +10 to +18 cm
Basic Shadow Tray Fore/Aft range (from posterior pad to chest pad) 0.5” to 12.5” 1 to 32 cm
 

Note:  Form-to-Fit Upper Body Supports, Lateral Configuration, and Tray Elbow Pads may reduce tray ranges or introduce interferences.  A demo or fitting is always recommended when specifying a highly configured product.

 

Swing Away Tray Height Range, referenced from hip pivot: +4” to +7”

 

+10 to +18 cm

 

 

Swing Away Tray Fore/Aft Range (from posterior pad to chest pad) 4” to 16” 10 to 41 cm
Swing Away Tray Angle Adjust Range -90 to +90 Degrees
Chest Pad, Tray Mounted 3” H x 8” W 8 x 20 cm
Elbow (Cutout) Tray Pads

–        Inside Width

 

9.25”

11”

13”

 

23 cm

28 cm

33 cm

     
Upholstery/ Positioning Options/ Specs    
Hip Supports    
Hip support pad size 4.5” x 4” 11 x 10 cm
Hip supports width range

2 sizes

7” to 13”

12” to 18”

18 to 33 cm

30 to 46 cm

Hip Support, TT, Width Range 10” to 16” 25 to 41 cm
Lateral Supports    
Lateral support pad size 4” x 6” 10 to 15 cm
Lateral supports width range, Supine & MPS – 2 sizes (4” of adjustment. Ranges vary based on pad width)

–        11” wide upper body pad

–        13” wide upper body pad

7” to 11” (11” pad)

10” to 14” (11” pad)

9” to 13” (13” pad)

12” to 16” (13” pad)

18 to 28 cm (11” pad)

25 to 36 cm (11” pad)

23 to 33 cm (13” pad)

30 to 41 cm (13” pad)

Lateral Supports w/Elbow Stops and/or Arm Rests, Supine and MPS Only.

Width Range including optional pad holes

w/ 11” Wide Pad

w 13” Wide Pad

 

 

 

10” to 17”

12” to 19”

 

 

25 to 43 cm

30 to 48 cm

Lateral supports, TT, width range 10” to 16” 25 to 41 cm
Lateral supports, Prone, width range

–        7” wide upper body pads

–        9” wide upper body pads

 

7 to 12”

9 to 14”

 

18 to 30 cm

23 to 36 cm

Lateral supports height range 4”

8” by swapping L/R

10 cm

20 cm

Lateral supports Fore/Aft Range 1” 3 cm
     
Trunk and Torso Pads    
Pelvic Support, Planar and Form-to-Fit

(2 sizes each)

Supine / MPS

 

10” H x 11” W

10” H x 13” W

25 x 28 cm

25 x 33 cm

Main Support Pad, TT, Planar

(3 sizes)

 

19” H x 16” W

22” W x 16” W

25” W x 16” W

48 x 41 cm

56 x 41 cm

64 x 41 cm

Upper Body Support, Planar and Form-to-Fit

(2 sizes each)

Supine / MPS

8” H x11” W

8” W x 13” W

 

20 x 28 cm

20 x 33 cm

Prone Pelvic Anterior Support

Planar

 

Form-to-Fit

 

 

10” H x 11” W

10” H x 13” W

10” H x 11” W

10” H x 13” W

 

25 x 28 cm

25 x 33 cm

25 x 28 cm

25 x 33 cm

Prone Upper Body Anterior Support

Planar

 

 

 

Form-to-Fit

 

 

 

 

5” H x 7” W

5”H x 9”W 7”H x 7” W 7”H x 9”W 5”H x 12”W 7”H x 12”W 10”H x 13”W

 

13 x 18 cm

13 x 23 cm 18 x 18 cm 18 x 23 cm 13 x 30 cm 15 x 33 cm 18 x 30 cm 25 x 33 cm

     
Positioning/Chest Strap (pad size) 6” x 10” 15 x 25 cm
Positioning Strap and Chest Strap Options
Catalog Number Base Component Actual Capacity
Inches cm
PA3011 A3011 29 74
PT30066 T30066 35 89
PA5610 A3011 29 74
PB5542 T30066 35 89
PA3062 A3062 45 114
PB3052 B3052 57 145
PB5592 A3062 45 114
PB5594 B3052 57 145
PB5596 A3062 45 114
PB5598 B3052 57 145
 
Chest vest – X-Style 11” L x 9.5” W 28 x 24 cm
                  – X-Style 14.5” L x 10.5” W 37 x 27 cm
                    -Y Style Vest 17.5” L x 11.5” W 44 x 29 cm
                    -Y Style Vest 20.5” L x 12.5” W 52 x 32 cm
     
Posterior Head Support    
Head support height range. (From top of upper body pad.) 1” to 10” 2.5 to 25 cm
Head support depth range – from backrest -3.5” to +1” -9 to + 2.5 cm
Head Support Options 5” H x 8” W 13 x 20 cm
  6” H x 10” W 15 x 25 cm
  7” H x 14” W 18 x 36 cm
Form-to-Fit Head Support

Height

Width, variable up to approximately:

 

5”

10”

 

13 cm

25 cm

TT Planar Head Support 9” H x 10” W 23 x 25 cm
     
Anterior Head Support (Face Prompt)    
Prone Model Only.  2 pads.  Pad Size. 3 W x 9” H 8 x 23 cm
   
     
   
     
     
Configurations Available:    
 

Supine (posterior support surfaces)

 

 
 

MPS (Multi-positional Stander, w/Prone Forward optional feature, posterior support surfaces)

 

 

TT (Tilt Table, larger posterior upholstery surfaces)

 

 

Prone (anterior support surfaces)

 

Catalogs

Zing Catalog

Zing Mini-Catalog

Standing Brochures

Hip Surveillance Guide

Parents Guide to Standing

Manuals

Manual

Translations

Funding

Zing MPS TT Size 2 Sample LMN

Order Forms


Zing MPS TT Size 2 Itemized Order Form – 2023 Pricing | Effective Jan 1, 2023

Zing MPS Size 2 Package Order Form – 2023 Pricing | Effective Jan 1, 2023


Media Kit

Zing MPS TT Size 2 Media Kit

Funding Resources

Funding Guide

Zing MPS TT Size 2 Sample LMN

Write an LMN